You are here

MicroPitch

Fine-resolution pitch shifter for subtle tone-fattening plus delays for interesting slap back effects.

H9 Control View - Click (+) for more info

MicroPitch Algorithm Controls
Mix [MIX]
wet/dry mixer, 100% is all wet signal.
Pitch A/Pitch B Mix [PICHMX]
Controls the ratio of the level of Pitch A to Pitch B.
Pitch Shift Up A [PICH-A]
Controls the amount of pitch shift up for voice A from Unison to +50 cents.
Pitch Shift Down B [PICH-B]
Controls the amount of pitch shift down for voice B from Unison to -50 cents.
Delay A [DLY-A]
Controls the amount of time delay of the A pitch-shifted output. With Tempo OFF, delay is displayed in mSec. With Tempo ON, delay can be sync’d to the tempo and is displayed as a rhythmic sub-division of the tempo beat value.
Delay B [DLY-B]
Controls the amount of time delay of the B pitch-shifted output. With Tempo OFF, delay is displayed in mSec. With Tempo ON, delay can be sync’d to the tempo and is displayed as a rhythmic sub-division of the tempo beat value.
Modulation Depth [M-DPTH]
Controls the amount (or depth) of pitch modulation displayed in cents over a four octave range (two octaves down, two octaves up). Fine control for micro-pitch modulation is available and displayed in cents, ranging from -30 to +30 cents. When the modulation is a positive value the two voices will modulate in sync with each other; when the value is negative they will modulate out of sync.
Modulation Rate [M-RATE]
Controls the modulation rate.
Feedback [FEEDBK]
Controls the amount of feedback for Delays A and B.
Tone Control [TONE]
Controls the tone filter.
Output Level
At 0 the output level is unaffected. Increase the output level of the effect by up to 20 dB or lower by 30 dB.
TEMPO ON / TEMPO OFF
Tempo is turned ON/OFF on the H9 by simultaneously pressing the Right Footswitch and the PRESETS button. With Tempo OFF, tapping can be used to adjust delay parameter values (displayed as milliseconds or Hz). With Tempo ON, tempo is in BPM.
Active
Turn effect on or off..
FLEX
Doubles the pitch shift amount of both voices..
TAP
If Tempo is ON, the display indicates the current tempo in BPM (30 to 500 BPM) while tapping and the Tap LED will blink at the BPM rate. If Tempo is OFF, the display indicates the parameter value (milliseconds for most algorithms).