Input Volume + Midi out notes.

This topic is empty.

Viewing 4 reply threads

Author

Posts
- March 27, 2011 at 11:19 pm #107752
  
  Tomerttb
  Member
  
  Hi Guys I have 2 questions regarding the Eventide H8000FW.
  
  1) I am using an external Synth (Virus TI2), connecting using unbalanced mono cables from the synth to the analog Eventide inputs 3 + 4 (1/4 inch plug), the synth volume is all the way up.
  
  the Eventide metering on the input shows at max about -12.
  
  Is that ok ?
  
  2) I connected a MIDI cable from Eventide Midi Out to an external device (Creamware Pulsar Card), I open a Midi channel inside Cubase5.5 and choose on the output "Eventide Dice"
  
  When i play my keyboard i can see that the "Busy" light on the Eventide is working so the Eventide receives the signal but I cant get any Midi signal on the Creamware card.
  
  Any Idea why the eventide is not sending any notes ?
  
  Thank you very much
  
  Tomer.
- March 28, 2011 at 3:48 pm #121810
  
  nickrose
  Moderator
  Eventide Staff
  
  Tomerttb:
  
  Is that ok ?
  
  Probably. You could adjust the "PreA/D Gain" to increase it a bit. (UM p.73).
  
  Tomerttb:
  
  Any Idea why the eventide is not sending any notes ?
  
  I have a pretty good idea. The "Eventide Dice" (FireWire MIDI in this case) is an input to the unit, not a source for the MIDI out connector The MIDI outs are only used when the H8000 itself generates MIDI.
- March 28, 2011 at 9:39 pm #121813
  
  Tomerttb
  Member
  
  Thank you Ni
  
  1 – Understand and work perfectly.
  
  2 – I understand, do you think I can use the through ? sending the Midi notes on the FW to the unit, and let them continue to the next hardware using the through ?
  
  Thank you Tomer.
- March 28, 2011 at 10:30 pm #133025
  
  nickrose
  Moderator
  Eventide Staff
  
  Sorry. The FireWire MIDI and the DIN5 MIDI are entirely separate, so you can't use the unit as a FireWire MIDI interface for external equipment.
- March 28, 2011 at 10:42 pm #133026
  
  Tomerttb
  Member
  
  Thank you
  
  Tomer.
Author

Posts

Viewing 4 reply threads

You must be logged in to reply to this topic.