Opto/Bias Tremolo / Phaser Question

This topic is empty.

Viewing 2 reply threads

Author

Posts
- July 9, 2011 at 2:52 am #107985
  
  microwerx
  Participant
  
  Hello,
  
  I have a question about using the Tremolo on my Mod Factor. I want to recreate a Fendery opto style tremolo and a Vox bias style tremolo. My question is, which LFO will recreate the appropriate waveforms for these effects? I've just been using one of the presets that sounds good, but when I try to create my own, it doesn't sound quite right. For example, when I try to recreate a Fender type tremolo, I expect it to be kind of square wave like, but the square wave is on/off/on/off…but not quite like the vintage circuit…so it sounds like I'm using a Boss slicer type effect. Any advice?
  
  My second question is, does anyone have some good Small Stone style patches they've come up with for their Mod Factors?
  
  Any help and advice would be immensely appreciated.
- July 15, 2011 at 7:33 pm #122404
  
  achaput
  Moderator
  
  Hello,
  
  For the style of Tremolo you're looking for I would start with Factory Preset 7:1, Tumbleweed Trem. It uses a SINE wave.
- February 12, 2018 at 6:48 pm #148404
  
  brickbriscoe
  Participant
  
  so more or less set up preset list on both and they will coincide if I do the first thing?
  - February 12, 2018 at 8:44 pm #148405
    
    bohan
    Moderator
    Eventide Staff
    
    brickbriscoe wrote:
    
    so more or less set up preset list on both and they will coincide if I do the first thing?
    
    Yes. For instance, if you switch the first H9 to preset 10, the second H9 will also go to preset 10.
  - July 26, 2019 at 7:10 pm #152419
    
    brickbriscoe
    Participant
    
    bohan wrote:
    
    brickbriscoe wrote:
    
    so more or less set up preset list on both and they will coincide if I do the first thing?
    
    Yes. For instance, if you switch the first H9 to preset 10, the second H9 will also go to preset 10.
    
    so if i want it to switch the second one to “bypassed” is there something i need to do? when i’m switiching the sercond one comes in armed as well
    
    thanks
- February 11, 2018 at 7:17 pm #148396
  
  brickbriscoe
  Participant
  
  you answered my question before I even asked! thanks. now if i can find a tutuorial on linking my two h9 via midi for my set list using one to change both units as needed i’m all set!
  
  thaks
  
  Brick
  
  achaput wrote:
  
  Hello,
  
  For the style of Tremolo you’re looking for I would start with Factory Preset 7:1, Tumbleweed Trem. It uses a SINE wave.
- February 12, 2018 at 5:14 pm #148401
  
  bohan
  Moderator
  Eventide Staff
  
  brickbriscoe wrote:
  
  If I can find a tutorial on linking my two h9 via midi for my set list using one to change both units as needed I'm all set!
  
  If you just want to use one H9 to control another H9 when you switch presets, it's easy. Just use a MIDI cable to connect your H9s. Go to your first H9's setting menu by pressing and holding HOTKNOB and right footswitch, and set as follows: Settings->MIDI->PGM.XMT->turn it to ON, then you are all set. If you want to transmit more messages and control more parameters/expression, this thread may be helpful: https://www.eventideaudio.com/community/forum/stompboxes/controlling-pitchfactor-and-modfactor-midi
- July 27, 2019 at 4:43 am #152424
  
  bohan
  Moderator
  Eventide Staff
  
  brickbriscoe wrote:
  
  so if i want it to switch the second one to "bypassed" is there something i need to do? when i'm switiching the sercond one comes in armed as well
  
  Every preset in H9 can be saved with "Bypassed" or "Activated". If you bypass this preset and save it again. When you switch to this preset it should be bypassed.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.