Recording stereo with mono setup and 2 takes?

Home › Forums › Products › Stompboxes › Recording stereo with mono setup and 2 takes?

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • August 4, 2011 at 7:53 pm #108042
      OhSoInsane
      Member

      Hi guys,

      I love my pitchfactor and want to use it to its full potential in a stereo. I unfortunately do not have a stereo rig =( but I had this idea in my head:

      1) Record 1 take with the pitchfactor sending L Mono out

      2) Record 2nd take with pitchfactor sending R Mono out by switching that out cable from 1) that was in L Mono out to R Mono out

      Then I would mix and pan it accordingly in the DAW. Would this work? Or do the Eventides have some logic to send a different signal if only 1 out cable is connected? If so, then I might need dummy plug on the complement out jack.

    • August 5, 2011 at 4:09 pm #122510
      wedelich
      Moderator
      Eventide Staff

      Hi OhSoInsane,

      Most of the algorithms do have some logic built in to them to change the stereo sends based on what's plugged in.  If you take this approach, the "dummy" plug idea should work. 

      -Russ 

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.