Timefactor Feature Request

Home › Forums › Products › Stompboxes › Timefactor Feature Request

  • This topic is empty.
Viewing 3 reply threads
  • Author
    Posts
    • June 26, 2012 at 11:45 pm #108884
      parsky1
      Member

      Is there any way to add a parallel/serial feature to the timefactor delay.  Currently both Delay A and B run in parrallel.  It would be nice to be able to set them to serial for certain sounds (ie Delay line A gets fed into Delay line B).  Dual parallel delays has it place, but sometimes it is nice to have one delay feed into another.  This would really perfect the TimeFactor.

    • June 27, 2012 at 2:39 pm #123591
      ndeshpande
      Participant
      Eventide Staff

      The Filterpong delay does this already. 

    • June 27, 2012 at 10:48 pm #123600
      parsky1
      Member

      I thought filterpong just alternated the delays between L and R in stereo?  What does it do in mono? 

    • June 28, 2012 at 4:07 pm #123602
      ndeshpande
      Participant
      Eventide Staff

      Hi parsky1,

      The dry sound first goes through delay A, which gets sent to the output. Delay B waits for the sound coming out of delay A and adds its own delay. So, for example, if delay A is set to 200 ms and delay B is set to 100 ms, you will hear your dry sound, then the sound again at 200 ms (delay A), then a third time at 300 ms (delay A + B). In mono, they both come out of the same channel; in stereo, they come out of alternating channels. 

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.