MIDI problem after recent firmware: Space is switching presets in bypassed mode

I just updated my Eventide Space to 5.0.0 via H9 control. Since I've updated, it has been having trouble talking with my Disaster Area DMC-6D. Whenever I change presets via the DMC-6D, the Space does so in bypassed mode, not active. I'm using the same settings I was using prior to the update. This problem did not occur prior to the update. Any help would be much appreciated.

For example: I change a preset on the Space from the DMC-6 while the Space is active, the Space changes presets and then bypasses the preset.

Here are the MIDI settings on the Space (The DMC-6D recommends using channel 4 for the Space but it works just the same using channel 2):

RCV CHANNEL – 2
RCV CTL  – Pedal        C42
                   TAP           C64
RCV MAP – BYPASS   1
CTL XMT – Off
PGM XMT – Off
OUTPUT – Thru
MIDICLK IN – Off
MEDICK OUT – Off
CLK FILTER – Off 

Here are the MIDI Specifications for the DMC-6D as well as the recommended setting for the space.