Harmonizer 7600 kick/snare replacer patch

This topic is empty.

Viewing 2 reply threads

Author

Posts
- January 14, 2015 at 7:32 pm #112249
  
  moremarch
  Member
  
  Hi.
  
  I have been struggling with the kick/snare replacer patch: could anyone give me step-by-step instructions how to use it?
  
  I have managed to record two short samples on the Harmonizer (one for bass drum, one for snare), but I cannot trigger them from my Roland VS 2480 recording station. Do I have to synchronize the two devices? Till now, I have been using the Harmonizer in analogue mode
  
  Thank you in advance!
- January 15, 2015 at 6:47 pm #127363
  
  nickrose
  Moderator
  Eventide Staff
  
  On looking at the preset, it has a fault (sorry). "gate2-out" should be connected to "plays2-in1." As a result, triggered playback only works with channel 1. This could be easily fixed with Vsig if you are so inclined, and I'll mark it as a bug.
  - January 8, 2017 at 10:20 pm #145398
    
    moremarch
    Member
    
    nickrose wrote:
    
    On looking at the preset, it has a fault (sorry). “gate2-out” should be connected to “plays2-in1.” As a result, triggered playback only works with channel 1. This could be easily fixed with Vsig if you are so inclined, and I’ll mark it as a bug.
    
    Hi. Could you provide simple, basic instructions how to fix it in Vsig? I am very much inclined to fix it, but I totally lack the basic skills.
    
    Thank you so much in advance!
- January 16, 2015 at 11:57 pm #127370
  
  moremarch
  Member
  
  Hi!
  
  Thank you for the response. I will experiment with the patch this weekend; I would still appreciate step-by-step instructions how to do it. For instance, it is not clear to me whether the Eventide will replace every bass-drum sound on a certain track, based on the sample that is stored within, and if I will have to compensate for latency: the one bass-drum sample on the Eventide doesn't start exactly at point 0.
  
  Sorry if the question is so basic. I have very little experience with samples
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.