H9 + Infinity Looper + midi

Tagged: infinity looper, MIDI, sync

This topic is empty.

Viewing 1 reply thread

Author

Posts
- November 29, 2016 at 3:42 pm #113844
  
  kenhan
  Participant
  
  The H9 and the Infinity Looper are the only midi devices on my board, and I go from H9 midi out/thru to Infinity midi in. With that said, what is the right midi out/transfer mode in the H9 app? I’m trying to figure out how to sync H9 and Inifnity to the tempo I tap out on the H9. Thanks.
- November 29, 2016 at 3:59 pm #144976
  
  nickrose
  Moderator
  Eventide Staff
  
  It will depend on what MIDI control (if any) you are sending TO the H9, and whether you want it to reach the Infinity.
  - November 29, 2016 at 4:23 pm #144980
    
    kenhan
    Participant
    
    nickrose wrote:
    
    It will depend on what MIDI control (if any) you are sending TO the H9, and whether you want it to reach the Infinity.
    
    In this case I’m not sending any midi messages TO the H9. I’m only interested in sending the tap tempo info to the Inifinity Looper.
    
    Case #2
    
    Is it possible to send tempo info from Garage Band / Logic / Reaper to H9 via bluetooth, and then from the H9 to other devices? If so, how would one configure this in the H9 Control app and the MacOS midi settings? I find midi very confusing. Thanks for your help.
  - November 29, 2016 at 4:35 pm #144981
    
    gkellum
    Participant
    
    kenhan wrote:
    
    In this case I'm not sending any midi messages TO the H9. I'm only interested in sending the tap tempo info to the Inifinity Looper.
    
    Both Transmit and Thru + MIDI Clock will send tempo information. Since you only want the H9 to send tempo information but not otherwise control the Infinity Looper, I suppose you'll want to use Thru + MIDI Clock
    
    kenhan wrote:
    
    Case #2
    
    Is it possible to send tempo info from Garage Band / Logic / Reaper to H9 via bluetooth, and then from the H9 to other devices? If so, how would one configure this in the H9 Control app and the MacOS midi settings? I find midi very confusing. Thanks for your help.
    
    It is possible, but this won't work well. Sending the tempo information over Bluetooth adds too much jitter to the tempo and the devices that are trying to decipher the MIDI clock ticks end up swinging wildly around the true tempo. The mechanism for sending MIDI information over Bluetooth is under Settings.
  - November 29, 2016 at 6:04 pm #144982
    
    nickrose
    Moderator
    Eventide Staff
    
    kenhan wrote:
    
    In this case I'm not sending any midi messages TO the H9. I'm only interested in sending the tap tempo info to the Inifinity Looper.
    
    In that case, you should set
    
    MIDI OUTPUT = XMT
    
    MIDI CLK.OUT = ON
    
    This will send MIDI clock to the looper, which it should accept.
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.