Volume Boost Feature For HotSwitch

This topic is empty.

Viewing 5 reply threads

Author

Posts
- May 13, 2020 at 1:59 pm #115909
  
  Sicak
  Member
  
  Hi guys, I’ve owned my H9 Dark for around a month now and I can’t stop playing with it!
  
  I am currently using an expression pedal with the H9 and I’m wanting to know if there is anyway to save an output volume adjustment to a hotswitch patch. I know that you can save the output level to each preset but I would like to know if it can be adjusted to a hotswitch patch since I think it would be extremely useful for many of the presets.
  
  For example, if I were using the Spring where I would set the hotswitch output high on the tremelo side that way the tremelo sound and loud.
  
  Cheers!
- May 13, 2020 at 5:14 pm #154849
  
  bohan
  Moderator
  Eventide Staff
  
  Sicak wrote:
  
  Hi guys, I’ve owned my H9 Dark for around a month now and I can’t stop playing with it! I am currently using an expression pedal with the H9 and I’m wanting to know if there is anyway to save an output volume adjustment to a hotswitch patch. I know that you can save the output level to each preset but I would like to know if it can be adjusted to a hotswitch patch since I think it would be extremely useful for many of the presets. For example, if I were using the Spring where I would set the hotswitch output high on the tremelo side that way the tremelo sound and loud. Cheers!
  
  Sorry, the output level cannot be mapped to Hotswitch.
- May 13, 2020 at 10:13 pm #154852
  
  camn
  Participant
  
  why not why not why not this is my #1 feature request. Oh wait no, relative MIDI CC is 🙂
- May 20, 2020 at 5:57 pm #154928
  
  apalazzolo
  Participant
  
  I have looked all over for this.
  
  The “trim” parameter in EQCompressor will do this. So will the “output” parameter in MangledVerb (this can be used as a boost/overdrive if you turn off the reverb portion. I believe Ultratap (which has a great delay) could easily be modified by Eventide to do this. I have asked Eventide to consider it but they have not responded one way or the other.
  
  People have asked Eventide to modify the “output” slider for every algo (on the right of the Control screen) to do this but it is apparently not possible.
  
  Good luck!
- May 20, 2020 at 11:01 pm #154929
  
  bohan
  Moderator
  Eventide Staff
  
  Currently, you can use a MIDI CC or expression pedal to control the output. Hotswitch cannot be mapped to the output slider yet. It is possible that this feature might be added in a future update but I cannot guarantee when that will happen.
- June 25, 2020 at 6:06 pm #155223
  
  apalazzolo
  Participant
  
  As noted, EQCompressor and Mangledverb will do this. I also just realized that PitchFuzz can be made to do this too.
  
  So it lis limited, but those three algos will do it.
- May 24, 2020 at 9:24 am #154947
  
  Sicak
  Member
  
  Thanks for the reply guys.
  
  Yeah I’m guessing it must be impossible to map the output sliders to each algo or the champs at Eventide would have done this by now.
  
  Still an amazing pedal never the less…
  
  apalazzolo wrote:
  
  I have looked all over for this.
  
  The “trim” parameter in EQCompressor will do this. So will the “output” parameter in MangledVerb (this can be used as a boost/overdrive if you turn off the reverb portion. I believe Ultratap (which has a great delay) could easily be modified by Eventide to do this. I have asked Eventide to consider it but they have not responded one way or the other.
  
  People have asked Eventide to modify the “output” slider for every algo (on the right of the Control screen) to do this but it is apparently not possible.
  
  Good luck!
Author

Posts

Viewing 5 reply threads

You must be logged in to reply to this topic.