Eventide Space Power Supply issue

Home › Forums › Products › Stompboxes › Eventide Space Power Supply issue

Viewing 1 reply thread
  • Author
    Posts
    • April 10, 2023 at 9:48 am #170339
      nemanja78
      Participant

      Hi all,

      Had Space for a while now, and used it only with the original psu that came with the pedal.

      Now I notice that green light on the adapter is not blinking and pedal cannot be powered – can someone from the tech confirm that this is psu failure?

      Also, can you please elaborate what is the size of the power connector – I am trying different adapters from Strymon, and Hologram pedals, and 5.5 x 2.5 mm cannot fit the Space.

      Another question, would it be ok to use Space with the quality multipedal power supply bricks?

    • April 10, 2023 at 10:01 am #170340
      joecozzi
      Moderator
      Eventide Staff
      nemanja78 wrote:

      can someone from the tech confirm that this is psu failure?

      Please contact support@eventide.com so they can troubleshoot.

      nemanja78 wrote:

      Also, can you please elaborate what is the size of the power connector – I am trying different adapters from Strymon, and Hologram pedals, and 5.5 x 2.5 mm cannot fit the Space.

      You need a 2.5mm barrel connector that has a  center-positive polarity. Most pedals use center-negative polarity so that’s probably why none of them work.

      nemanja78 wrote:

      Another question, would it be ok to use Space with the quality multi pedal power supply bricks?

      Yes, as long as the output provide 500mA at 9V and you use a 2.5mm barrel connector with center-positive polarity. With standard power supplies you’ll a cable like this: you’ll need something like this: https://voodoolab.com/product-category/cables/reverse2-5/

      If it’s a Eventide or Cioks power supply you need a green Flex4 cable.

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.