H90 Diatonic – Learn from Aux Switch?

Home › Forums › Products › Stompboxes › H90 Diatonic – Learn from Aux Switch?

Viewing 3 reply threads
  • Author
    Posts
    • May 27, 2023 at 8:05 pm #171599
      andychar
      Participant

      Currently I see that while using the Diatonic Harmonizer algorithm, the Learn function is possible via one of the built in performance footswitches, but since it’s not a performance parameter I don’t see an option to trigger this from an Aux switch.  Is this possible?

       

    • May 28, 2023 at 8:16 pm #171605
      brock
      Participant

      As an example, assume Diatonic is in Preset A.  Click on the Perform knob.  Use the middle LED button to cycle through the parameters until you reach LEARN.

      Press & hold that same middle LED button to assign LEARN to an external controller.  In this sub-menu, you can even Learn (Ctl Source) the LEARN (Parameter).

    • May 31, 2023 at 2:52 am #171646
      andychar
      Participant

      Thanks @brock for the advice.  Right now I use FS2 for Active/Bypass and FS5 for Learn, but I’d like to assign Learn to Aux Switch 1 for less toe tapping.

      If I follow your instructions it seems like the assignments are made to the builtin foot switches but can be also triggered externally.  If I also assign FS5 to be triggered by Aux Switch 1 then it does trigger Learn but also triggers Active/Bypass as well as tap tempo!  That seems odd.  What would be nice would be to assign Learn to an external controller without a dependency on the built in foot switches.

       

    • May 31, 2023 at 3:04 am #171647
      andychar
      Participant

      I figured out that the Aux Switch was also assigned to Active/Bypass + Tap Tempo and was able to disable that.  So your suggestion does work if the Aux Switch mirrors what FS5 is doing.  Thanks.

       

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.