Hello,

The PTHD card will give you 32 channels of I/O. You must then assign those I/O to be used for whichever FX Chain you like.

A simple example would be:

• FX Chain 1 > I/O 1-2
• FX Chain 2 > I/O 3-4
• FX Chain 3 > I/O 5-6
• FX Chain 4 > I/O 7-8.

You will then have 4 stereo FX busses. From Pro Tools, you will use a hardware insert to send the audio to FX Chain 1 using I/O 1-2. Using I/O 3-4 will go to FX Chain 2, etc.

More complex routing configurations can be set up, but I would highly suggest starting with a simple setup so you can understand how all of the routing is configured. From there, you can add more complex routings if needed.

I will need to see screenshots of your Pro Tools I/O settings to help you determine how to route any audio from Pro Tools.

Please share screenshots of the following:

• Hardware Setup > Peripherals
• All of the pages of the “I/O Setup” page (input, output, bus, insert)