TF/MF actual mA requirements?

This topic is empty.

Viewing 3 reply threads

Author

Posts
- January 24, 2008 at 1:31 am #105286
  
  Crysstalized
  Participant
  
  I have a Timefactor and will be adding a Modfactor to my pedalboard when they come out. Unfortunately, the TF style wall wart is just too big to have two of them on my board. What is the actual mA requirements for the pedals? I am looking to be running it off of a Voodoo Lab Pedal Power AC, which would provide me 1 jack for 9v 1200mA, but the other would need to be used for another 12v pedal (there are two 9v *or* 12v outputs at high current available), leaving me several 9v 600mA outputs to use for a TF/MF. Thanks!
- January 24, 2008 at 7:24 am #116826
  
  IDeangelis
  Member
  
  The User Manual you have says:
  
  Specifications
  
  Power Supply
  9 VDC, 1200 ma, Tip hot (+)
  
  I
- January 24, 2008 at 9:12 am #116830
  
  Crysstalized
  Participant
  
  I realize that is what the manual says, but I was looking for the actual usage as manufacturers usually provide adaptors that exceed the requirement of the pedal. Would you be able to get that info?
  
  Thanks!
- January 24, 2008 at 9:28 am #116832
  
  IDeangelis
  Member
  
  Don't use anything below the specs! These units have a lot of power and require a feed at specs statement.
  
  I
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.