I/O Question

Home › Forums › Products › Rackmount › I/O Question

  • This topic is empty.
Viewing 3 reply threads
  • Author
    Posts
    • February 4, 2008 at 3:06 pm #105329
      tacman77
      Member

      I was wondering if I can use the light S/Pdif input and the coax S/Pdif output at the same time?

       Thanks

    • February 4, 2008 at 3:24 pm #116915
      IDeangelis
      Member

      Good question!

      I think you should try; I personally don't see why it shouldn't work, w/the correct settings, unless internal hardware limitations put a stop to this.

      Try setting DIG-IN to RCA and DIG-OUT>OPTICAL OUT to S/PDIF.

      best

      I 

    • February 5, 2008 at 2:35 pm #116921
      tacman77
      Member

       It works. It wouldn't have if it didn't have all the setting choices. Nice.

      So I can use that extra output I had sitting around and use the coax as a send to another effects unit that is coax only.

      Cool.

    • February 5, 2008 at 2:45 pm #127952
      IDeangelis
      Member

      Nice!

      from the User Manual:

      All of the digital outputs send live signals all of the time! However, they only
      send one protocol. Select that protocol under SETUP DIG-OUT FORMAT.
      Under (CS-TYPE) select Pro if you are primarily interested in using the
      XLR digital outputs, and Cns if you are primarily interested in using the
      RCA or optical (non-ADAT) digital outputs.

       Idea

      I 

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.