ADAT port daisy chain??

This topic is empty.

Viewing 2 reply threads

Author

Posts
- February 20, 2008 at 10:49 pm #105367
  
  iamfractal
  Member
  
  Hello thanks in advance..
  
  I know there is an adat port back of eclipse.. At first I misunderstood eclipse has
  
  eight channel like H8000 🙂 but if I use adat port, still I can use 2 channels of audio
  
  (pair of 1-2, 3-4, 5-6, 7-8)
  
  Currently I have TC fireworx, it also has adat port.
  
  Question is, can I connect them thru daisy chaining?
  
  I want to save channels (If I use adat port, 6 channels are remaining unused)
  
  And what is the actual purpose of adat port? I think if 2 channels are only supported
  
  adat port is meaningless (S/PDIF or TOSLINK only needed)
  
  sorry for stupid question but plz help me 🙂
- February 20, 2008 at 11:00 pm #116989
  
  nickrose
  Moderator
  Eventide Staff
  
  The Eclipse can be set up to put its two output channels on any of the 8 ADAT channels, leaving the other 6 channels either muted or unchanged. It can also receive its input from any of the ADAT channels.
  
  This means that you can daisy chain the ADAT through the Eclipse, if I understand you correctly. You would probably want to use Wordclock as the sync source.
  
  See page 27 of the Eclipse Manual for more information.
- February 22, 2008 at 4:11 pm #117008
  
  tacman77
  Member
  
  This sounds cool!
  
  I have an ADA8000 that I'm only using half the channels. I'll see if it and the eclipse can share my one ADAT port.
  
  Thanks
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.