Velcro Friendly

This topic is empty.

Viewing 6 reply threads

Author

Posts
- March 11, 2008 at 7:50 pm #105444
  
  DCHORD
  Member
  
  This may sound a little petty, but I'm sure 99% of the Modfactor and Timefactor owners use velcro to attach the pedals to their boards. The rubber pad on the bottom makes it impossible to find a nice, clean, flat surface, to attach the velcro,without ripping the rubber pad off, or at least part of it.
  
  Is it possible to re-design the bottom to accomondate a place in each corner for applying velcro? Or do you have a better suggestion for securing pedals to a pedalboard?
  
  Thanks for listening
  
  Randy
- March 11, 2008 at 8:53 pm #117136
  
  afullerton
  Participant
  
  I agree 100%. I had to take the rubber pads off of both the TimeFactor and ModFactor. The pad stuck a little better to the TimeFactor but absolutely would not stick to the ModFactor.
- March 14, 2008 at 1:49 pm #117167
  
  DGillespie
  Moderator
  Eventide Staff
  
  Hey Guys,
  
  I've heard that one of our beta testers has done 2 long tours with industrial strength velcro and it's continued to work. I'll get the details and forward them on.
  
  Dan
- March 25, 2008 at 5:29 pm #128327
  
  axeman
  Member
  
  Hey Dan….
  
  I would appreciate hearing about this as well. I placed the TimeFactor and ModFactor on my pedalboard over the weekend. I use high quality velcro as well, on all my pedals for several years now. The TimeFactor and ModFactor would easliy pull off my board, leaving the velcro attached to the pedalboard.
  
  I removed the "padding" on the bottom of both pedals and placed velrco in those same locations, no problem with the pedals pulling away now.
  
  If there is a solution for this, I'd like to place the original pads back on the pedals.
  
  I'll watch this thread for your follow-up. Thanks for taking the time to check into this…..
  
  – Keith
- March 27, 2008 at 12:34 am #128336
  
  The_Crow
  Participant
  
  Me, too, Dan. Use my pedals on a rack shelf (w/velcro) – all other peds stay in place – same problemo – won't stick. Even though I treat my rack with great care – Mr. Timefactor won't stay put. I take it out nightly and place in gig bag – then take out and plug back in – not instant setup. Don't feel like pulling off "padding"
  
  Peace,
  Greg
- March 27, 2008 at 6:35 am #128337
  
  playon
  Member
  
  C'mon you guys, this is a piece of gear, not a piece of jewelry. I'm planning on buying one these soon and it's definitely gonna have the pad taken off and velcro put on the back – I'm sure it will easy enough to remove the velcro and re-apply the pad if necessary.
- March 27, 2008 at 12:34 pm #117240
  
  JNPMusic
  Member
  
  I just peeled off the bottom pad and then applied the super velcro! Now I can't get it off my pedalboard!>……..Works great!……
Author

Posts

Viewing 6 reply threads

You must be logged in to reply to this topic.