What is the typical range one one set the Global Mix/Dry setting in a combo/Head? I ask because I just recently re-acquired an Eclipse and it seems that I need to run this global parameter close to 50% Mix to get the desired wetness in presets like comb/band delays. Pwhen I last had an Eclipse I would never set this beyond 25% when run in the loop of my amps — and it provided enough wet signal.
This Eclipse was a Blem item, and when it first arrived it was not functioning properly. I had issues like….tracking was off (the signal was about a few hundreths of a second behind the actual played notes…and after about 3 or 4 patch/preset changes, the audio would cut out. I called support and they advised to clear the system's RAM — and that seem to have fixed those aforementioned problems.
But to my ears, I find that the comb/band delay presets/algos, are very faint even up to the 50% mix level.
I could be mistaken but I remember them being alot more audible in my previous Eclipse. In fact in my TimeFactor, this same algo…requires me to set the mix control no higher than 12 to 15% and it is very audible.
I'd like to know if this is the expected result and I am just wrong on my expectations.
