H8000 won’t pass audio

This topic is empty.

Viewing 2 reply threads

Author

Posts
- April 25, 2008 at 6:28 pm #105609
  
  ericlambo
  Participant
  
  First it started clicking and popping when trying to sync to either wordclock or AES. Then at one point the input LEDs stopped responding. If I hit BYPASS the input signal would register, but of course it wouldn't output audio.
  
  Then I tried connecting with analog connectors – setting sync to Internal 48 – and the same problem occured. LEDs would only register when unit is BYPASSed and no audio output at all.
  
  Any advice would be appreciated. I'd hate to have to send this in for service.
- April 26, 2008 at 12:00 am #117438
  
  cl516
  Participant
  
  Is the routing set up properly?
  
  Try sticking with the THRU preset first.
  
  Are the meters set correctly to show what you want?
- April 26, 2008 at 5:45 am #117439
  
  ericlambo
  Participant
  
  I switched to ADAT connections, then tried using a different wordclock cable. It worked fine this way. Then I switched back to AES and it continues to work.
  
  Seems like the wordclock cable was the problem.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.