Eclipse V3.5 released at last !!!

This topic is empty.

Viewing 6 reply threads

Author

Posts
- June 9, 2008 at 4:10 pm #105676
  
  nickrose
  Moderator
  Eventide Staff
  
  Eclipse software version 3.5 is now available for download from the Eclipse support area of eventide.com
  
  Release Notes:
  
  This is an intermediate release with a number of useful improvements and bug fixes. This full release replaces the previous beta versions. An updated version of the User Manual and pullout sheets are available online.
  
  Improvements:
  o Faster operation, with 50% lower MIDI latency
  o Twice as many external control sources allowed (Ext #9-16 added)
  o Support for E-Control plugin (H8000 compatible MIDI remote functions)
  o Remote control for A, B machine bypass under SETUP/EXTERNALS
  
  Fixes:
  o Missing hotkeys added to Preset #123
  o AES status bits set properly when sample rate changed
  o T_RATE value could load wrongly with certain presets
  o An audio problem with systems manufactured after 08/2005 has been fixed
  o If a unit is powered up in DSP bypass and then taken out of BYPASS, the output will be 100% dry until the wet/dry ratio is adjusted.
- June 9, 2008 at 4:31 pm #117556
  
  John01W
  Member
  
  Great news! Thanks a lot Eventide.
- June 10, 2008 at 8:29 am #117559
  
  Sasa Jungic
  Member
  
  Should I upgrade my machine which already has 3.5beta OS?
  
  THnx!
- June 10, 2008 at 9:01 am #117561
  
  IDeangelis
  Member
  
  Absolutely. Always get the final official release, a much improved version to favor to any beta one.
  
  best
  
  i
- June 12, 2008 at 12:53 am #128719
  
  ttosh
  Member
  
  I have done the upgrade from beta to final release and on the screen after reboot that asks me to clear setup the ok or cancel will not respond. What is the next step, I have rebooted 3 times now still nothing.
- June 12, 2008 at 6:49 am #128720
  
  IDeangelis
  Member
  
  What method did you use to update the unit (card or serial cable w/Pc)?
  
  What exactly happens when it asks to clear setup ("will not respond") ?
  
  thanks
  
  I
- June 12, 2008 at 3:20 pm #128722
  
  ttosh
  Member
  
  I updated via PC with the serial cable. I finally go this fixed. The
  flow of events were as such. I did the update using the PC and then
  when both the application and Eventide IDE said complete I rebooted the
  Eventide, it gave me the OK, Cancel option but was frozen where it
  would not respond. After 6 reboots it finally responded. This worked
  fine for me on the beta release but on this release gave me these
  issues. It is now working for me, but I do not know why it took 6
  reboots to respond.
Author

Posts

Viewing 6 reply threads

You must be logged in to reply to this topic.