expression pedal ..controlling TF & MF (at the same time?)

This topic is empty.

Viewing 6 reply threads

Author

Posts
- July 30, 2008 at 4:18 pm #105761
  
  konstantine3
  Member
  
  I was hoping via midi that the expression pedal could control both the time factor and the mod factor, so I wouldn't have to buy another exp pedal. Is that possible through midi?
  
  Another dumb midi question from me lol But I have to ask since all questions are valid
- July 30, 2008 at 4:40 pm #117719
  
  IDeangelis
  Member
  
  Hi Konstantine
  
  you'll find all info about this on page 37 of your TFactor manual. The Exp.Pedal and the knobs can send MIDI CC messages so, it's possible to do what you ask for.
  
  It might be not the best solution as programmability may get a bit complex. A separate pedal for each Factor gives you more flexibility in general.
  
  best
  
  i
- July 30, 2008 at 4:42 pm #117720
  
  nickrose
  Moderator
  Eventide Staff
  
  You can connect one (1/4" jack type) expression pedal to both TF and MF via a Y lead.
  
  Or you could use a MIDI pedal to control both units in series (set the first one to MIDI THRU).
  
  This would require them both to be set to the same MIDI channel, which would mean that all MIDI commands (not just the pedal) would be sent to them both. With careful choice of CC or ProgChange values this would be OK.
  - August 1, 2015 at 4:29 am #139991
    
    Giacomo Cicirello
    Member
    
    nickrose wrote:
    
    You can connect one (1/4″ jack type) expression pedal to both TF and MF via a Y lead.
    
    Or you could use a MIDI pedal to control both units in series (set the first one to MIDI THRU).
    
    This would require them both to be set to the same MIDI channel, which would mean that all MIDI commands (not just the pedal) would be sent to them both. With careful choice of CC or ProgChange values this would be OK.
    
    Hi, one question, I need the same setup one expression for a TF and a MF.
    
    Does this Y adapter work…
    
    http://www.amazon.com/Hosa-YPP111-inch-Female-Cable/dp/B000068O53/ref=sr_1_9?s=musical-instruments&ie=UTF8&qid=1438402911&sr=1-9&keywords=y+cable+1+8+inch+trs+to+dual+1+4+inch+ts+cable
    
    It has to be TRS or TS > DUAL TS?
    
    Thanks
- July 30, 2008 at 4:55 pm #117721
  
  konstantine3
  Member
  
  I'll check out the Y adapter cause I spent enough money on my rig lol Thanks very much for the info and Ill keep the midi notes in mind for future discovery
- July 30, 2008 at 8:52 pm #128868
  
  konstantine3
  Member
  
  on 2nd post Ill get an expression pedal lol
- August 1, 2015 at 3:56 pm #139992
  
  nickrose
  Moderator
  Eventide Staff
  
  The Y adaptor you show will be fine – the important thing is that all three ends be the same, ideally TS.
- August 1, 2015 at 9:00 pm #139995
  
  Stax_911
  Participant
  
  The best solution I found to that problem is a midi controler like the DMC-3. I allows you to control with your expression pedal till to 3 stomboxes or just to the one you want.
Author

Posts

Viewing 6 reply threads

You must be logged in to reply to this topic.