Rackmount support

This topic is empty.

Viewing 2 reply threads

Author

Posts
- August 20, 2008 at 7:03 pm #105789
  
  Eastward_In_Eden
  Member
  
  Page 53 of the H8000FW Manual has a strong recommendation to support the rear of the unit in a rackcase that will be transported.
  
  I'm considering a tall case w/ casters and am wondering what any of you are using for rear support of this heavy unit ?
  
  Thanks
  
  -Richard M
- September 4, 2008 at 1:25 am #117829
  
  drehleierguy
  Member
  
  Hello Richard,
  
  I just bought 4 small angle brackets from a hadware store, stuck some adhesive foam on the surfaces that would touch the H8000, and screwed them right into the plywood. I positioned them above and below the unit and tucked them in so that the foam was slightly compressed. Cheap, quick and effective!
  
  Cheers,
  
  ben
- September 4, 2008 at 10:23 am #117830
  
  Eastward_In_Eden
  Member
  
  Thanks, Ben… I just wasn't sure how much room there would be in the rack-case I ordered from PearsonCases.
  
  The case is plywood and brackets can be screwed in easily.
  
  Hope you will take a look at David Teren's new Eventide Harmonizers Facebook Group…. see you there !
  
  -Richard M.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.