Switching Time/Modfactor order in pedalboard?

This topic is empty.

Viewing 4 reply threads

Author

Posts
- September 30, 2008 at 2:21 pm #105852
  
  discospring
  Member
  
  Is anyone using a signal switch pedal (or another method) to change the order of Timefactor & Modfactor on their pedalboard?
  
  What's the best way to achieve this?
  
  Both 'factors have 2 inputs and outputs so it should be possible to connect them in both orders with an A/B switch before them – but the dual in/outputs are for either mono or stereo signals. I'm confused about what sacrifices that would entail.
  
  Can anyone explain, please?
- October 17, 2008 at 6:15 pm #117957
  
  discospring
  Member
  
  My question was answered by helpful folk at http://www.tdpri.com/forum/stomp-box
  
  The best solution seems to be the LoopMaster Effect Sequence Reverser, a switch-box with In, Out, and 2 Send/Receives. Hoping this will work. Here's a link:
  
  http://www.loop-master.com/product_i…c7fc4245a3dfc6
- November 8, 2008 at 4:28 pm #117999
  
  alwalt
  Participant
  
  I am using a 2 channel amp. So, I use a Boss Line Selector to switch between channels. In order to have the TF on both signal paths, I use both A and B inputs/outputs. By doing this, I loose the twin delay option, but I can handle each delay on a patch separatedly. For example, I can have A delay on 0 and B delay on 5. This would fit if have my A channel for rythm and B for lead, just stomp on the LSelector and the delay automatically goes on or off depending on which channel I use. You can mix two delay times on a patch also, having longer delays on one channel. Lots of uses this way, but requieres time to get it organized…
- July 18, 2009 at 9:11 am #129927
  
  oddb0d
  Member
  
  Both the input and output are seperate if you have plugs in both jacks. I plan on doing this….
  
  Loop 1 -> Pitchfactor L
  
  Loop 8 -> PitchFactor R
  
  In most cases they would mutually exclusive. I think that would give you a two position Mono Factor.
- October 31, 2011 at 2:35 am #122775
  
  zerenato
  Member
  
  The solution for me is a boss line selector and a rocktron patchmate .Patchmate send 1 >boss A return ,boss send A>patchmate return1,patchmate send 8>boss B return,boss send B > patchmate return 8,boss output > in modfactor,out modfactor > boss input.The mode of line selector in A+B mix,use levels of the ls-2 to match the two signals, excuse me for tthe bad english.
Author

Posts

Viewing 4 reply threads

You must be logged in to reply to this topic.