Routin tool/software not interfacing between PC and H8000FW

This topic is empty.

Viewing 3 reply threads

Author

Posts
- December 26, 2008 at 6:35 pm #105985
  
  Emilio Biagini
  Member
  
  Hi folks,
  
  I'm trying in several manners to handle the routing tool from my PC but no success.
  I tryed several manners:
  
  – via midi by a sound card
  – via FIREWIRE / midi via DICE drivers (they works perfectly as sound card so are good
  installed)
  – the above have benn done by 2 different PC,s but no success
  – I have NOT tried via a serial cable as I do not have serial connection on PC
  
  It is evident that I am unable to have a coonection between the Routing software and the H8000FW; it remains solidly in "DEMO MODE"
  
  Can somebody give me some suggestions or "tricks" to have success in this?
  
  Many Thanks
  
  Emilio Biagini
  Lucca — Italy
- January 2, 2009 at 8:47 am #118150
  
  IDeangelis
  Member
  
  Ciao Emilio
  
  you should get one of those USB_to_Serial port converters. I have a couple of them and work fine on both Windows and Macs.
  
  best
  
  Italo
- January 3, 2009 at 2:03 pm #118151
  
  Emilio Biagini
  Member
  
  Italo,
  
  I have tested, now it works!
  
  Very useful tool!!
  
  Thanks a lot
  
  Emilio
- January 3, 2009 at 2:29 pm #129237
  
  IDeangelis
  Member
  
  Good!
  
  It should be pointed out that many PC motherboards may not offer a COM port…BUT most of them have a socket on whick a COM port PCI bracket can be connected.
  
  This is true of all motherboards I have used, ASUS that is. I'm sure other brands may have similar configurations.
  
  regards
  
  I
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.