midi amp with eventides

This topic is empty.

Viewing 2 reply threads

Author

Posts
- January 14, 2009 at 4:29 pm #106015
  
  shane-eventide
  Member
  
  I got a line 6 flextone amp and i'm using it with the modfactor and timefactor in the stereo fx loop and with midi
  
  this amp has 36 presets, they start on program change 1 and go up, i have the eventides changing presets along with the amp
  
  i'm using the line 6 foot controller, fbv shortbaord, the amp saves presets with fx loop on/off pre preset, and the footswitch lets you stomp it in and out on the fly
  
  other feature i'm using is the amp sends tap tempo and tuner on one switch, the tap button works on the timefactor but not modfactor (modfactor doubles bpm) so i'm using the reverb switch and it's cc message for tap
  
  i already have the line 6 footswitch, but if you didn't have that you could use a factor pedal to change presets on the amp using the midi out
- May 9, 2009 at 10:40 pm #118588
  
  dognmoon
  Member
  
  This is all pretty fascinating since I have a Flextone III+ and an extension cab and would love to be able to use some of these eventide stompboxes with it. Would you mind giving me the idiot's run down on how to hook all of this up? I'm midi illiterate, for sure.
  
  You can also email me at corey at dognmoon dawt calm if you'd prefer to do it offline.
  
  Thanks!
  
  -c
- May 11, 2009 at 1:41 pm #118594
  
  shane-eventide
  Member
  
  sure
  
  just plug a midi cable from the flextone midi out to the factor's midi in
  
  I think the default settings will work except one
  
  turn on program change receive in the factor's utility settings
  
  then when you change presets on the flextone the factor will change too
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.