Flash Card Update

This topic is empty.

Viewing 7 reply threads

Author

Posts
- April 21, 2009 at 2:12 pm #106190
  
  lionelred
  Participant
  
  Hi
  I just unsuccessfully try to update my Eclipse from V3 to the latest OS
  In the process I wiped my presets damn!
  Nevermind I would still like to update as nothing to lose now.
  I have a Mac and was using a flash card formatted on a pc FAT32
  I now formatted on a mac just reads card not formatted?
  any thoughts
- April 21, 2009 at 3:12 pm #118513
  
  drooney
  Member
  
  Hi Lionel,
  
  When formatting a compact flash card for use with an Eventide product you will want to do so in the FAT format not FAT32. Mac's aren't able to format in this type so you can use the Eclipse to format your card.
  
  Insert the card into the Eclipse and press 'setup' until you see "utility" and select it. Then select 'format'. You'll be asked if you really want to format it and select yes. It will only take a moment to format the card and it will indicate when this is complete. Once this is complete remove the card, and insert it into your card reader/writer and transfer the files for the 3.51 software. Follow the instructions provided for this method and you should be set.
  
  Please note it is best to use a card that is below 2G capacity. If you continue to experience an issue feel free to contact support@eventide.com for further assistance.
- April 21, 2009 at 5:07 pm #118514
  
  lionelred
  Participant
  
  Just tried that and the eclipse freaked a long bleep and then crashed.
  I am using 1GB card so not sure really.
- April 21, 2009 at 5:09 pm #129664
  
  drooney
  Member
  
  What is it that you tried? What do you mean by crashed? Does the unit power on normally?
- April 21, 2009 at 5:20 pm #129665
  
  lionelred
  Participant
  
  Sorry for not being clear
  
  I did check the format type in the mac after formatting in the eclipse and it said FAT 32
  
  I Formatted the card in the eclipse transfered the files from the mac (not in the folder though as it cant read the OS in the folder)
  
  I boot up pressing 1 and it gets stuck on this message
  loading romprog.exe from card
  
  if it loads the display looks like snow storm of pixels, big bleep then powers down
- April 21, 2009 at 5:38 pm #129666
  
  drooney
  Member
  
  No trouble at all. Well it sounds as though there may be an issue with the card you are using. I would try using a different card, preferably one that is a lower storage size than the one you are using.
- April 22, 2009 at 9:03 pm #129672
  
  lionelred
  Participant
  
  Hey
  I tried it with a different card last night and it worked! thanks for helping me out, shame about my presets I'll just have to build some better ones
  
  many thanks
- April 24, 2009 at 1:47 pm #129674
  
  drooney
  Member
  
  Great news! Good luck with the new presets!
Author

Posts

Viewing 7 reply threads

You must be logged in to reply to this topic.