Problems with settings in play mode

This topic is empty.

Viewing 3 reply threads

Author

Posts
- June 27, 2009 at 10:34 am #106280
  
  herb
  Member
  
  Hello,
  can anybody explain this to me:
  – I'm in play mode
  – I make make knob settings in one effect (e.g. digital effect, setting the filter on 100 % for high cut)
  – I switch to another effect (e.g. vintage) without making any knob changes
  – After switching back to the first (digital) effect, the filter settings do not correspond to the actual knob settings (high cut 100 %).
  
  Why not? And where do the settings come from when I switch back to the initial effect?
  Is there a take-over of settings from a default value? I thought that in play mode, the settings always correspond to the actual knob position.
- July 8, 2009 at 8:39 pm #118776
  
  herb
  Member
  
  Nobody can help me with this problem?
- July 8, 2009 at 9:00 pm #118777
  
  IDeangelis
  Member
  
  If you make adjustments to an effect and you don't store it as a preset, when you switch to a different fx all previous knobs settings are lost. When you go back to the previous fx factory default settings are loaded instead. Save your tweaks.
  
  I
- July 9, 2009 at 10:02 pm #118781
  
  nickrose
  Moderator
  Eventide Staff
  
  I deduce that you are using a Timefactor.
  
  When you select an effect with the encoder knob, it loads certain default parameters to give it the desired sound.
  
  Because the knobs are not motorized (people already find these boxes expensive) the knob position does not correspond to the current setting. If the knob is moved, it will update the parameter.
  
  The previous effect settings are stored in PitchFactor (until powerdown), and will be in a future version of TimeFactor. Until then Italo is right – you have to save things you want to keep.
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.