no Send in algorithm FuzzWaWammyPre (149)?

This topic is empty.

Viewing 4 reply threads

Author

Posts
- September 15, 2009 at 3:55 pm #106435
  
  jfcharles
  Member
  
  Hi everyone,
  
  The drawing for this algorithm in the doc shows a send (S) right after the EQ. I can't find it when playing with the unit. Is it there?
  
  I tried to use the TRIM parameter in the EQ instead, but the implementation is not good for performance: when we change this parameter with an external, no audio xfade/audio line connects old and new values, and that results in clicks in the signal when we change the TRIM (usually that doesn't happen when the algorithm has a send).
  
  Is there another way to doing that?
  
  Thanks for you help,
  
  Jean-Francois.
- September 15, 2009 at 4:16 pm #119039
  
  IDeangelis
  Member
  
  Hi JF
  
  the S can also be labeled MANUAL_PED. It's the same function and it's patched to EXT_1, which is assigned to Pedal 1 as factory default.
  
  best
  
  I
- September 15, 2009 at 4:53 pm #119040
  
  jfcharles
  Member
  
  Thanks for the answer!
  
  Yes, it does work IF I set the EFFECT (in Parameters-> Pedal) to volume.
  
  Problem is: I want to use the wammy transposition fixed to -1200 for instance. To achieve that, I have to set the EFFECT to wammy, otherwise, I don't get any transposition, right?
  
  But when I set the EFFECT to wammy, then I can't control the "volume" anymore, right?
  
  Actually, as far as I understand, in this algorithm, there is a choice (eXclusive OR) between the volume, the wammy, and the wawa. Or what am I missing there?
  
  Thanks for your help!
  
  J-F
- September 15, 2009 at 5:13 pm #130135
  
  IDeangelis
  Member
  
  Yep. You have to choose which fx is controlled by the pedal…either …or…or.
  
  You may place a second algorithm after this one, in series, and use its SEND for level control.
  
  best
  
  I
- September 15, 2009 at 5:55 pm #130136
  
  jfcharles
  Member
  
  That's what I feared, thanks for the confirmation!
  
  J-F
Author

Posts

Viewing 4 reply threads

You must be logged in to reply to this topic.