Is this right

Home › Forums › Products › Rackmount › Is this right

  • This topic is empty.
Viewing 9 reply threads
  • Author
    Posts
    • November 6, 2009 at 1:13 pm #106613
      lionelred
      Participant

      Just trying to configure my H8000FW but it seems different from internet pics

      look at the attachments 

    • November 6, 2009 at 1:37 pm #119412
      IDeangelis
      Member

      The attachment was a rear panel pict of the H8000FW.

      How's yours?

      I

    • November 6, 2009 at 1:54 pm #119413
      lionelred
      Participant

      try this having trouble uploading

    • November 6, 2009 at 2:28 pm #119416
      lionelred
      Participant

      try this

    • November 6, 2009 at 2:30 pm #119417
      IDeangelis
      Member

      It looks like your unit is the original first version, labeled "H8000". Then the H8000A followed (with 4 analog I/Os) and finally the H8000FW with 4 analog I/O, FireWire and 8 AES-EBU channels on a DB-25 connector.

      So, your unit can be only used as a stereo machine thru analog I/Os. Any other reset must be used thru AES or ADAT…

      ….or you can upgrade it to H8000FW! The Eventide website has information on the costs and details.

      all the best

      I

    • November 6, 2009 at 4:09 pm #130541
      lionelred
      Participant

      IT DOES HAVE THE FIREWIRE INSTALLED!?!

    • November 6, 2009 at 4:11 pm #130542
      IDeangelis
      Member

      No FireWire.

      Your unit is an H8000, NOT an H8000FW.

      I

    • November 6, 2009 at 4:14 pm #130543
      IDeangelis
      Member

      Your pictures don't show the left side of the rear panel. But I see that the analog I/Os are only 2 and that was typical of the original H8000.

      I

    • November 6, 2009 at 4:30 pm #130545
      lionelred
      Participant

      here is the full image

    • November 6, 2009 at 4:39 pm #130546
      IDeangelis
      Member

      Ok

      that is an H8000 with FW and AES/EBU on DB25 but the analog I/Os are not what they should be.

      It looks like an H8000 that has been upgraded in an incomplete way. You should contact support@eventide.com, providing the unit serial number and describing where did you buy it.

      best

      I

  • Author
    Posts
Viewing 9 reply threads
  • You must be logged in to reply to this topic.