GTR4000 “level” issue

Home › Forums › Products › Rackmount › GTR4000 “level” issue

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • March 12, 2010 at 9:54 am #106948
      cmp
      Member

      Hello there, 

      Having what I hope a minor/easily correctable issue getting the right levels in and out of my GTR4000 (recently got) Ordered what I think to be correct cables. pin 2-H and going to a 1/4 to effects loop in amp. Amp tone quite low as well and tone very very colored, not at all what I know this unit to sound like.  Thoughts?

      also, do these new pcmcia type 1 card adapters work? If so are there any special requirements?

      Sorry but no manual. Thanks in advance!

    • March 12, 2010 at 12:08 pm #120135
      IDeangelis
      Member

      Hi cmp

      you should get sure about what type of signal level is handled by your amp fx loop, if +4dB line level or -10/-20dB instrument level.

      All info is available in technotes here:

      http://www.eventide.com/AudioDivision/Support/Knowledgebase.aspx

      click on Harmonizers > Connections and Wiring

      all the best

      I

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.