TimeFactor and MIDI Clock

This topic is empty.

Viewing 6 reply threads

Author

Posts
- April 3, 2010 at 2:26 pm #107010
  
  dtirer
  Member
  
  So I just got a midi switching system and I need to sync up a few pedals tempo wise.
  
  So here's what Im wondering:
  
  Lets say i send a program change to the TimeFactor from my midi controller. The program change tell the TimeFactor to load a specific bank-patch. That patch has a specific tempo. If I in turn want the TimeFactor to send that tempo out as midi clock via the midi out, how do I do that?
  
  Also if I wanted to the TimeFactor to send that tempo out of the midi out as CC messages, is that possible?
- April 5, 2010 at 10:23 pm #120252
  
  achaput
  Moderator
  
  Hello,
  
  In the MIDI menu of System mode, set CLK OUT to ON. Then the TimeFactor will transmit MIDI clock of the tempo saved in any preset.
  
  You can connect an aux switch to TimeFactor and have that transmit MIDI CC messages. If the device you're transmitting to can interpret those messages as tempo, then you should be able to tap MIDI tempo on the aux switch.
- April 9, 2010 at 7:08 pm #120275
  
  dack
  Member
  
  Note that due to a bug in the current firmware, the MIDI clock tempo out of the TimeFactor will not change when you change presets. You need to tap the tempo again for it to change.
- April 9, 2010 at 8:08 pm #131467
  
  dtirer
  Member
  
  wow, is that really true??
  
  If so, that makes this pedal pretty useless for me.
  
  Can I use an older version of the software and be ok?
- December 27, 2013 at 7:14 pm #125168
  
  alexworkman
  Participant
  
  Here are a few videos that show this bug. Any help would be appreciated.
  
  https://vimeo.com/32542838
  https://vimeo.com/32543006
- December 28, 2013 at 3:52 pm #135957
  
  nickrose
  Moderator
  Eventide Staff
  
  dack:
  
  the MIDI clock tempo out of the TimeFactor will not change when you change presets
  
  This will be fixed in the next release, due in the New Year.
- April 15, 2014 at 11:18 pm #136473
  
  satl
  Member
  
  Does anyone know if this issue has been fixed yet?
Author

Posts

Viewing 6 reply threads

You must be logged in to reply to this topic.