Relay / true by pass

This topic is empty.

Viewing 1 reply thread

Author

Posts
- June 24, 2010 at 5:29 am #107145
  
  Mark L
  Member
  
  Hi,
  
  If I use XLR ins and outs is it a true relay hardwire by pass?
  
  I looked at the system signal flow chart and it does not look like it, but the manual implies it (relay switched).
  
  My power amp (VHT 2502) only has 1/4 " unbalanced inputs so if it is not a true by pass which is better
  
  A. XLR to 1/4" or B. !/4' to 1/4" unbalanced
  
  Note that the power amp has a input sensitivity switch.
  
  Thanks for your help.
  
  Mark
- June 24, 2010 at 2:59 pm #120533
  
  nickrose
  Moderator
  Eventide Staff
  
  Mark L:
  
  If I use XLR ins and outs is it a true relay hardwire by pass?
  
  Yes.
  
  Note that other input/output combinations do NOT have true relay bypass – it would need too many relays. But, you can make/buy a cable to go between XLR and 1/4" (see manual), which allows you to come in XLR and go out 1/4". This would be better than 1/4" everywhere.
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.