TimeFactor and Ground Control Pro

This topic is empty.

Viewing 3 reply threads

Author

Posts
- June 27, 2010 at 3:31 pm #107148
  
  steve.mastr
  Participant
  
  Hello,
  
  I am trying to control my Eventide
  TimeFactor with an expression pedal (EB JR.) that's plugged into my
  Ground Control Pro. I am noticing a delay when trying to control the
  Expression Pedal features via CC controllers (I go to the heel position
  and the TimeFactor takes about 2-3 seconds to go from 100 to 0, I go
  back to the toe position and it takes another 2-3 seconds to go back up
  to 100). This isn't that big of a deal since I'm mostly using the pedal
  to increase feedback and wet/dry signal, but I would like to know if
  MIDI can make it react the same way it would if I'm plugged right into
  the 1/4" Expression Pedal input.
  
  Please let me know.
  
  Thanks,
  
  Steve
- June 28, 2010 at 3:16 pm #120540
  
  nickrose
  Moderator
  Eventide Staff
  
  Obviously, this shouldn't happen. It may be that for unknown reasons the GC is deluging the TF with MIDI messages and is clogging its pipes. Or maybe there is something (again unknown) wrong with the TF.
  
  It might be helpful to know EXACTLY what the TF display is showing during the 2-3 seconds. Also, if possible, beg borrow or steal a different controller and see if you get the same result.
- June 28, 2010 at 4:12 pm #120541
  
  steve.mastr
  Participant
  
  It shows 100 counting down to 0 VERY gradually…..and vice versa
- June 28, 2010 at 4:51 pm #131738
  
  nickrose
  Moderator
  Eventide Staff
  
  Very mysterious. Presumably it is either the GC or the TF, so the best thing to do is to try to replace one or the other and see if it makes a difference. This is not a problem we know.
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.