Midi program change problem

Home › Forums › Products › Stompboxes › Midi program change problem

  • This topic is empty.
Viewing 4 reply threads
  • Author
    Posts
    • September 30, 2010 at 2:23 pm #107302
      hoy77
      Member

      Hi,

      I have a problem when I change the preset  with a midi pedal board.
      I have a TM, a PF and a MF. They are in chain with midi cables, every factor
      have a different midi channel.
      Sometimes when I change a preset, the third pedal in chain load
      a wrong preset.
      I change cables, midi pedal board and the order of stompboxes
      but the problem still remain.
      Have you solutions?

    • September 30, 2010 at 3:21 pm #120816
      nickrose
      Moderator
      Eventide Staff

      Make sure (obviously) that the first two are set to MIDI THRU.

      Less obviously, make sure that they also have MIDIclock out turned OFF.

    • October 1, 2010 at 12:12 pm #120818
      hoy77
      Member

      Thanks for reply.

      The pedals are set to MIDI THRU, and I almost sure that MIDIclock out is OFF, I'll check it as soon as possible.

      Are there another suggestes?

    • October 6, 2010 at 8:17 am #132046
      hoy77
      Member

      Ok I checked the settings…..

      The pedals are set to MIDI THRU and Midi Clock out is Off.

      I have a friend that have the same pedals, and same problem. Also I knew a person in another guitar's forum that have MD and PF and a third stompboxes(another brand) with midi in/out, he has the same problem …..

      Could you check this situation? I think that there some bug or problem on midi

    • October 14, 2010 at 3:24 pm #132065
      hoy77
      Member

      Have you tried?

  • Author
    Posts
Viewing 4 reply threads
  • You must be logged in to reply to this topic.