3.1 -> 3.5 upgrade issue

Home › Forums › Products › Rackmount › 3.1 -> 3.5 upgrade issue

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • January 26, 2011 at 5:26 am #107598
      erictfree
      Member

      I'm using a supported SanDisk 256MB card on my Eclipse, which is running 3.1, and the Eclipse seems to accept it just fine.

      When trying to upgrade to 3.5 however the Eclipse doesn't respond to the 1 and 3 keys. I did load the 1.2 bootloader and that went as expected (I got all the way to the PROGRAMMING COMPLETE. CYCLE POWER. message, but still no response from the 1,3 keys on reboot).

      I do see that the 2 key works and invokes the Update Utility (and if I had a serial port handy I'd try that ;)).

      Any help on next steps?

      Eric

    • January 26, 2011 at 3:35 pm #121475
      nickrose
      Moderator
      Eventide Staff

      Try the upgrade again. Try it with a serial port.

      If it still does not work, contact support@eventide.com.

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.