TimeFactor won’t bank up after update

This topic is empty.

Viewing 5 reply threads

Author

Posts
- March 7, 2011 at 1:28 pm #107693
  
  mikerose
  Member
  
  I updated a few weeks ago and now the TimeFactor won't bank up. It's not the switch as the tap mode works perfectly, but when I put it back into bank mode, nothing. The presets work, but I can't bank. If I save into slot 2:2, then I can utilize the extra banks, but that's it. Any ideas as to what's going on, or more importantly how to fix it?
- March 7, 2011 at 6:03 pm #121675
  
  nickrose
  Moderator
  Eventide Staff
  
  Hello cousin Mike !
  
  Not quite sure what you are saying. What do you mean by "bank up" ?
- March 7, 2011 at 6:10 pm #121677
  
  mikerose
  Member
  
  I can't change banks with the footswitch. I'm stuck to using 2 presets, 1:1 and 1:2.
- March 7, 2011 at 7:14 pm #132899
  
  rabiddiabetic13
  Member
  
  did you see how many banks are active in setup
  
  Utility–> Banks–> L# … H#
  
  Mine is setup to L1….H50 and I get all 50 banks.
  
  hope this helps
  
  A
- March 8, 2011 at 3:46 am #132904
  
  mikerose
  Member
  
  Just tried that. It worked!!! It was letting me save in the other banks but maybe they were still inactive? I have no idea, but it works! 🙂 Now if only Eventide could build in the ability to bank down…
- March 8, 2011 at 1:00 pm #132906
  
  rabiddiabetic13
  Member
  
  You can bank down with an aux switch. read the post for the link below
  
  http://forum.eventide.com/cs/forums/t/7007.aspx
Author

Posts

Viewing 5 reply threads

You must be logged in to reply to this topic.