Eclipse – whammy – Detunes mode how?

Home › Forums › Products › Rackmount › Eclipse – whammy – Detunes mode how?

  • This topic is empty.
Viewing 3 reply threads
  • Author
    Posts
    • September 8, 2011 at 11:31 pm #108101
      bazsa82
      Participant

        Hi,

        I would like to adjust my eclipset than whammy pedal's Shallow and Deep detunes mode.

        Thanks!

        Balage

      • September 25, 2011 at 1:50 pm #122691
        brock
        Participant

          Here's a start (from the manual; I don't own an Eclipse yet):

          Select one of the shifter algorithms ("Dual Wammy").

          Use the Master parameters.

          Set the Heel parameter to 0 cents.

          For a Shallow emulation, set the Toe parameter to – 4 cents.

          For a Deep emulation, set the Toe parameter to – 30 cents.

          Delay to minimum.

          LowNote to match the input instrument.

          XFade to minimum.

        • September 26, 2011 at 8:27 pm #122697
          bazsa82
          Participant

            Hi,

            If the Toe to – 5 cents "in Shallow" is better…

            Many Thanks!!!!!

            Best Regards!

            Bazsa82

          • October 27, 2012 at 6:05 pm #134960
            bazsa82
            Participant

              I used the eventide mono1 and stereo out.

              output 1 –> Channel 1 (in a mixer)  pan left

              output 2 –> Channel 2 (in a mixer) pan right

              If I pan the chanels to middle, the effect is better.

              How can I sets panorama in this effect? I could't find in.

              Thanks.

          • Author
            Posts
          Viewing 3 reply threads
          • You must be logged in to reply to this topic.