TF display flash weirness

This topic is empty.

Viewing 2 reply threads

Author

Posts
- February 22, 2012 at 6:50 am #108443
  
  jmusolino
  Participant
  
  Hey all…My TF display has just started flashing some interesting messages. While in Bank Mode, it will flash something along the lines of "1/4 Turn ->" or "No Dly Turn <-". I haven't seen either of these before, and I'm not getting anything like that on my MF or PF. Any ideas, suggestions, etc. would be most appreciated. Thanks…Joe
- February 23, 2012 at 11:38 pm #123159
  
  achaput
  Moderator
  
  Hello,
  
  It sounds like you have "Catchup" turned on. This is a knob mode which prevents the knobs from being active until they are physically moved to the saved value in the Preset.
  
  To turn this mode off, enter System Mode by pressing and holding both the Right Footswitch and Encoder Knob for a few seconds. Then turn the Encoder knob clockwise until you see UTILITY. Press the Encoder button to enter and look for CATCHUP. Press the Encoder Button to enter this menu and set to OFF.
  
  Alan
- February 26, 2012 at 6:47 am #123163
  
  jmusolino
  Participant
  
  Perfect. I had been making some system changes and must have inadvertently changed that to On. Thanks very much for the fix!
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.