Presets question

This topic is empty.

Viewing 3 reply threads

Author

Posts
- June 13, 2012 at 9:49 am #108841
  
  Dario
  Member
  
  Hello,
  
  on my H8000FW running the 5.5 OS , when i use two a preset like the #1424 Sequence Wa, the "sequenced wha" effect is barely audible, it's very weak in background. Which kind of parameters have I to tweak to make it more audible and marked?
  
  I have a similar behaviour with the # 1420 OrganicAnimation preset. Even if I tweak the <sens> paramenter, it seems don't happen anything, I listen only to the sound of my guitar, without anything else. It seems like an <empty> preset.
  
  Any suggestions are very appreciate
  
  thanks
- June 16, 2012 at 4:10 pm #123550
  
  Dario
  Member
  
  Any suggestions? any advice?
  
  let me know, i need assistance
  
  thanks
- June 16, 2012 at 6:20 pm #123551
  
  wilkinsi
  Participant
  
  It may be the level of the algorithm/FX engine that's set too low or B is set too high. It is also possible to have two algorithms where one phases the other out. I suggest trying to choose a different algorithm with one of those you're using to determine if its the latter.
- June 17, 2012 at 2:24 pm #134631
  
  Dario
  Member
  
  First of all, I want to specify that I'm using only one of these algorhitm ( the #1424 Sequence Wa and the #1420 OrganicAnimation ) one-by-one and not togheter.
  
  They are loaded only on DSP A, so I'm not using the DSP B.
  
  About the DSPs levels, they are set on 100% Wet both, so in my case the level of the algorithm/FX engine is not set too low, because it's at 100% Wet , also becuase I keep my H8000FW connected to the mackie mixer and there I can adjust further my levels..
  
  I really don't know what I can tweak within the # 1424 or the # 1420 algorithms to be able to listen to their "effect".
  
  Any other suggestions?
  
  Let me know
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.