MIDI PC message selects preset, but in bypass

This topic is empty.

Viewing 4 reply threads

Author

Posts
- August 1, 2012 at 3:06 am #108989
  
  ctc
  Member
  
  When sending pc messages with my midi foot controller to the TimeFactor, the TF changes to the correct preset, but then it always changes to bypass mode. So I configured ACT in the RCV CTL settings to be CC 23, and added a command to my foot controller to send cc 23 with a value of 127 after each PC message sent, the same problem occurs. Can anyone explain this behavior? How will I keep the TimeFactor in active mode ? When doing this
- August 1, 2012 at 3:27 pm #123691
  
  underwood
  Member
  
  Hello,
  
  didn't have a solution but I have the same problem. The MF acts different, it always goes in active mode!
- August 1, 2012 at 5:37 pm #123692
  
  MarcoR
  Participant
  
  Sending a PC message selects the preset in the state it was saved in; so if you saved it in bypass, it is recalled in bypass. At least that's how it works for me.
- August 1, 2012 at 6:47 pm #123694
  
  underwood
  Member
  
  Didn't know that. Have to try it.
  
  What FW Version have you installed?
- August 2, 2012 at 1:23 pm #134741
  
  MarcoR
  Participant
  
  The latest 3.5.0[4].
Author

Posts

Viewing 4 reply threads

You must be logged in to reply to this topic.