Factor Pedals: Using Midi to select presets in a bypassed state, and the Aux switch for effect On/Bypass?

Home › Forums › Products › Stompboxes › Factor Pedals: Using Midi to select presets in a bypassed state, and the Aux switch for effect On/Bypass?

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • November 3, 2012 at 5:08 pm #109254
      luca9583
      Participant

      I've got a Pitchfactor and a Voodoo Lab Control Switcher, all controlled by an MFC 101 foot controller.

      I want to be able to use the Control Switcher to turn PF On or Off (Bypassed) via the Aux Switch input, and then use Midi to call up my PF presets but in a bypassed state. I find that switching the PF On or Off this way is faster than by Midi.

      At the moment the Aux switch works fine but whenever i select a preset via Midi it always comes on with the effect active, regardless of the position of the Aux switch. Is there a way to remedy this or does Midi selection of presets always override the Aux switch's position?

    • November 5, 2012 at 5:11 pm #123967
      nickrose
      Moderator
      Eventide Staff

      On the latest software, if you save a preset when bypassed, it will come up bypassed if you load it from MIDI.

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.