Space BIG issue/bug

This topic is empty.

Viewing 3 reply threads

Author

Posts
- March 11, 2013 at 5:18 pm #109657
  
  redrain68
  Member
  
  Hi
  
  I fonud this
  
  when I use the MODECHOVERB algorithm I can't save the FxMix parameter.
  
  The save work only when the parameter is in the CHORSMIX or in FLANGMIX range.
  
  But when I move the parameter in the SWPTVERB range and save,
  then I go on another preset an then I go another time on the saved
  preset the range is always (of the FxMix pot affected parameter) in the
  FLANGEMIX 0 (I see because I have catchup function activated ad I see on
  the display "FLANGEMIX 0 turn < "
  
  So I have also noticed this : if the knob is physically in the
  max position every time I move the knob I read on the display FLANGEMIX
  0 TURN <.
  
  But, attention, it the knob (FxMix) is
  physically at zero position I see only one time in the display FLANGEMIX
  0 turn >…..after when I move the knob nothing happen until I reach
  the FLANGEMIX 0 stored parameter (but this is not the value that I have
  stored !)
  
  I think this is a very BIG issue
  
  roberto miele
  
  italy
- March 12, 2013 at 12:26 am #124364
  
  redrain68
  Member
  
  Another think : on the MODECHOREV the hot switch don't work when I use it on the FxMix knob !
- March 12, 2013 at 12:28 am #124365
  
  redrain68
  Member
  
  an other issue, when I use the Hot Switch function on the MODECHOREV the parameter of the FxMix encoder is not saved (it work on other algorhytm)
  
  roberto
- March 12, 2013 at 9:26 pm #124368
  
  redrain68
  Member
  
  Hi Roberto,
  I was able to verify this problem on my Space. I have forwarded the issue to the developers and this bug should be fixed in the next software release. Thank you for bringing it to our attention.
  Best Regards,
  Jerome Hyman
  Audio Support Technician
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.