Power cycling bricked h9?

This topic is empty.

Viewing 4 reply threads

Author

Posts
- January 13, 2014 at 6:28 pm #111313
  
  nick__mccabe
  Participant
  
  I'm only maybe five sessions into my H9. I had Bluetooth connection issues with my MacBook so attempted to power cycle the H9 to remedy the issue. The H9 was perfectly happy, I unplugged the psu with no apparent issue, replug and nothing: no display, no lights, nada.
  
  The psu is fine, it is happily powering my pitch factor and space. Holding the reset combos initially caused the display to momentarily flash whilst powering up but now seemingly does nothing.
  
  Anything else I can try or is it time to box up the H9 and send back to base?
  
  Cheers,
  
  Nick
- January 13, 2014 at 6:36 pm #125241
  
  nickrose
  Moderator
  Eventide Staff
  
  I assume you have tried powering it up numerous times. Do the leds do anything, or is it totally dead ?
  
  You should probably contact support@eventide.com
- January 13, 2014 at 6:47 pm #125242
  
  nick__mccabe
  Participant
  
  No reaction whatsoever now. First couple of times I tried the hotknob plus right button combination I got a flash of garbled characters in the display and then nothing. Attempting that now yields nothing though.
  
  Am I okay to link to this thread or shall I just paste the whole thing if I contact support@ET?
  
  Cheers
  
  Nick
- January 13, 2014 at 8:00 pm #136052
  
  nickrose
  Moderator
  Eventide Staff
  
  Oh dear .. a link should be OK.
- January 15, 2014 at 11:03 pm #136060
  
  Mcdookus
  Member
  
  Is this THE Nick McCabe???
Author

Posts

Viewing 4 reply threads

You must be logged in to reply to this topic.