ModFactor Preset not active via Midi

Home › Forums › Products › Stompboxes › ModFactor Preset not active via Midi

Viewing 4 reply threads
  • Author
    Posts
    • April 1, 2014 at 10:25 am #111501
      NNGG
      Member

      Hi There,

      I have ModFactor and TimeFactor pedals. I switch them both with a Liquid Foot Jr midi controller. Only simple PC messages to both for switching between presets. The TimeFactor works fine, but the ModFactor only switches to the correct preset, but it's not active.

      Any help woulkd be appreciated.

      Thanks,

      Gergely

    • April 1, 2014 at 3:42 pm #125636
      nickrose
      Moderator
      Eventide Staff

      Does this apply to all presets ? If a preset is saved when not active it will load inactive from MIDI.

    • April 1, 2014 at 5:39 pm #125638
      NNGG
      Member

      Normal
      0

      21

      false
      false
      false

      HU
      X-NONE
      X-NONE

      Hi nickrose,

      Thanks for the quick answer. Meanwhile it turned out that it
      was some kinda software bug, ’cause I've "downgraded" the software to
      an earlier version, and everything is working just fine now.

      But your suggestion was some new information to me, thanks! 🙂

    • April 1, 2014 at 8:24 pm #136384
      nickrose
      Moderator
      Eventide Staff

      But, note, earlier versions don't have this capability. Not sure where it came in.

    • December 26, 2021 at 10:28 pm #161371
      Paulsaf1
      Participant

      I just updated to firmware 5 and have this problem with bank preset 1:1….can’t switch to it in active mode. Others do work. I resaved the preset by pressing the encoder button while in active mode on, still doesn’t work. Help?

      thank you

  • Author
    Posts
Viewing 4 reply threads
  • You must be logged in to reply to this topic.