H9 doesn’t generate any midi signal, can’t be used as a midi clock source?

Home › Forums › Products › Stompboxes › H9 doesn’t generate any midi signal, can’t be used as a midi clock source?

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • April 30, 2014 at 1:13 pm #111579
      PacoDicenta
      Participant

      Hello, I have an Eventide H9. Software updated – 4.4.6(1)

      I need to use H9 as a midiclock source, and it seems impossible.

      No matter how I configure midi settings, no signal comes out from the "midi out" port.

      Midi output mode= Transmit

      Midi cable= tested, working ok

      Other devices tested when receiving midiclock from other sources. Working ok. 

      Using a Midi Monitor software, no signal comes from H9. No midi controller signal, no clock signal, no system exclusive messages. NOTHING. Software tested with other devices, working ok.

      H9's midi-in and midi-out ports working perfectly when receiving midi signal and re-transmitting it cia midi thru, so it's not a physical problem.

      Both H9's manual and Eventide's site says that you can use H9 as a midi clock source.

      So, is it true? Can I use it as a midi clock source? Indifferent

    • April 30, 2014 at 4:45 pm #125809
      nickrose
      Moderator
      Eventide Staff

      You can use it as a MIDIclock source, Look at User Manual p.42 – as well as MIDI/OUTPUT=XMT you need to set MIDI/CLK.OUT to ON.

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.