Timefactor PC works but not CC

Home › Forums › Products › Stompboxes › Timefactor PC works but not CC

  • This topic is empty.
Viewing 5 reply threads
  • Author
    Posts
    • June 21, 2014 at 7:16 pm #111728
      aggiemike08
      Member

      I'm using a fractal audio MFC-101 to control the timefactor. 

      I am able to get the PC commands to work but I cannot get any CC commands to work.  I'm trying to control the effect bypass/active.

      i have RCV Channel set to 1 and RCV CTL for the bypass set to CC0.

      on the MFC-101 I am sending a CC 0 on channel 1 but the timefactor does not bypass or activate.  Like I said when i send a PC command on channel 1 it works.  Any ideas?

    • June 21, 2014 at 7:38 pm #126180
      aggiemike08
      Member

      Also, I'm doing the same thing/strategy with the space pedal which is working but not on the timefactor 

    • June 21, 2014 at 8:08 pm #126181
      brock
      Participant
      Quote:
      on the MFC-101 I am sending a CC 0 on channel 1 but the timefactor does not bypass or activate.  Like I said when i send a PC command on channel 1 it works.  Any ideas?

      It appears that you already have MIDI -> OUTPUT set to THRU (program changes are received).

      I'm thinking that the problem lies with the value of the CC0 message that you're sending.  A continuous controller message has two parts:  CC number, and the value 0-127.  In a "switching" type of situation, any value from 0-63 is OFF; 64-127 is ON.

      As an example, I have my FCB 1010 send a CC number with a value of 127 for Bypass, and the next press of the footswitch sends the same CC number, but with a value of 0 (for Active).

    • June 21, 2014 at 10:39 pm #126183
      aggiemike08
      Member

      I did not know that… I was trying to use 0 and 1.  The MFC had 0 and 127 as default.  Must have been why. Let me try that out

    • June 22, 2014 at 1:40 am #126184
      aggiemike08
      Member

      Is the bypass state saved with the preset?  I'm trying to get the instant axess switch to load a certain delay preset and activate it when I select the switch but then bypass when I bypass the instant axess switch.  It seems the saved state is over rising the CC commands

    • June 23, 2014 at 4:28 pm #126200
      nickrose
      Moderator
      Eventide Staff

      When  you load a preset with a PC, the bypass state is that when it was saved.

  • Author
    Posts
Viewing 5 reply threads
  • You must be logged in to reply to this topic.