Power Factor Power Supply??

Home › Forums › Products › Stompboxes › Power Factor Power Supply??

  • This topic is empty.
Viewing 4 reply threads
  • Author
    Posts
    • December 30, 2014 at 2:04 am #112199
      jm197
      Participant

      I am a bit confused on the Powerfacor .  It states it will run 4 Eventide stompboxes but has 2 outputs that are 9/12v at 400mah and 2 outlets that are 12v only at 400mah. I have a Space and a timefactor both stating power requirements of 9v 1200mah and a H9 with a power requirement of 9v 500mah.  Can someone help?

    • December 30, 2014 at 3:34 pm #127248
      nickrose
      Moderator
      Eventide Staff

      The 1200mA is an overstatement (sorry). All of them will be happy with 400-500mA at 9V, or, in the case of a well regulated supply like a Powerfactor, will use a lower current at 12V.

    • December 30, 2014 at 4:35 pm #127249
      jm197
      Participant

      Hello, Thanks for the reply.  So it will be ok to run the boxes on the 12V outlet even though they are 9V?  Thanks

    • December 30, 2014 at 8:09 pm #137876
      nickrose
      Moderator
      Eventide Staff

      jm197:

      So it will be ok to run the boxes on the 12V outlet even though they are 9V

      At the risk of repetition – as long as it is the well regulated output of the PowerFactor. A generic 12V unit may cause damage.

    • December 31, 2014 at 1:48 am #137878
      jm197
      Participant

      Ok Thanks. I'm sorry to ask again but I wasn't sure I understood.  This clears it up.  Thanks again.

  • Author
    Posts
Viewing 4 reply threads
  • You must be logged in to reply to this topic.