H9 Looper Length

Home › Forums › Products › Stompboxes › H9 Looper Length

  • This topic is empty.
Viewing 2 reply threads
  • Author
    Posts
    • January 12, 2015 at 7:03 pm #112241
      benborman
      Member

      I understand that the Looper algorithm is written to support the TimeFactor hardware, and thus the looper length is limited to 12 seconds at full quality. 

      Technically, does the H9 have the capacity to allow longer looping times at full quality? And if so, is this planned for a future release?

      Thanks!

    • January 12, 2015 at 7:06 pm #127339
      nickrose
      Moderator
      Eventide Staff

      Sorry, no. It is limited by the amount of installed sram memory, which in this case is the same as the TF.

    • January 13, 2015 at 10:44 am #127342
      Bodde
      Participant

      What about the delay time? Can that be increased to 8 seconds or even better 16 seconds? Not sure if this is possible or if there are plan the increase the delay time in the near future? I use these really long delays for my soundscapes. I prefer delays over the looper for this although the loop can also do it (but it feels different with the looper and with delay you have other options). Would be great if the H9 could do this so I could use this as my main delay.

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.