Condenser Mic > XLR input > 1/4 amp out > guitar amp?

This topic is empty.

Viewing 2 reply threads

Author

Posts
- February 1, 2015 at 3:55 pm #112299
  
  bmnn
  Member
  
  Hi there,
  
  Trying to make sense of the various routing capabilities of MXLNK. I'd like to connect a mic (phantom powered condenser) to the "MIC / LINE IN" XLR input, then pick on some effects via an H9 stompbox through the effects loop of MXLNK on the fly and then send it all out to a guitar amp which is connected with a 1/4 jack on the "TO AMP" output. Will that work? Or does microphone input only leave through the "DI / LINE OUT"?
  
  Thanks
  
  Michael
- February 19, 2015 at 1:24 am #127552
  
  JWaltz
  Participant
  
  hi Michael
  
  What you describe will work.
  
  DI/LINE out is copy of the AMP Out, but is fixed at a DI or LINE level, so the Output Level
  
  control that sets the level for Amp Out and headphones has no effect on the DI/LINE OUT level.
  
  joe waltz
  
  eventide
- February 19, 2015 at 8:55 am #138321
  
  bmnn
  Member
  
  Thanks Joe!
  
  I was not able to extract that information from the various routing diagrams on the webpage as there's either a mic connected and the di/line out, or a mic and an instrument connected – but then going out through both amp and di/line outs.
  
  Now that makes sense. Way easier using MixingLink than the AUX send of a mixing console then. Saves two DI boxes I guess.
  
  Michael
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.