A way to change bypass mode for each preset?

This topic is empty.

Viewing 3 reply threads

Author

Posts
- February 28, 2015 at 4:01 pm #112381
  
  stratboy
  Member
  
  Hi! I know that probably the answer is just NO. But I try to ask anyway: is there a way to save different type of bypass? I also have a 3 switch controller to assign other functions. I sometimes have the need to immediately cut the delay fx and for now I'm doing it by assigning a totally dry set to a controller. It would be better if I could just program this right in the presets, though.
  
  Regards
- February 28, 2015 at 7:46 pm #127592
  
  nickrose
  Moderator
  Eventide Staff
  
  You read my mind ! Bypass mode is currently set the same for all presets as a global parameter. It might be annoying if you had to set it for every preset.
- March 1, 2015 at 2:51 pm #138426
  
  stratboy
  Member
  
  …Could be simply global but overridable. Nothing special here, it's a really common programming design pattern 🙂
- December 7, 2016 at 12:56 pm #145054
  
  Monas
  Participant
  
  I have the opposite problem with my H9, so I thought I’d bump this.
  
  I want to keep the bypass status global and independent from the presets. But it seems like the bypas status is automatically saved with each preset and there’s no way to turn that off. Only the Tempo and Mix buttons have settings to make them global. Am I missing something?
  
  Thanks for any advice!
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.