DIY Expression Pedal

Home › Forums › Products › Stompboxes › DIY Expression Pedal

  • This topic is empty.
Viewing 2 reply threads
  • Author
    Posts
    • April 24, 2015 at 10:08 am #112523
      Goldmember
      Participant

      Hi everyone,

      I just built my own expression pedal from a broken Dunlop Crybaby Wah. Overall cost about 25$ for the parts plus a used Crybaby from Ebay for around 25$ (with some patience).

      For those, who live in Europe (greetings from Germany!): Prices in $ or € are pretty much the same.

      Since the Line 6 expression pedals are around for some time now and they work with the H9, I figured, this should work. So I looked for a good DIY Thread.

      https://theprojectrecordist.wordpress.com/2012/12/10/

      Everything you need to know is in there. Just choose a 20k pot – although a 10k pot should work, too.

      The rest cosmetics: spray paint the pedal with the color of your liking and some clear rim lacquer for protection. Just check the nearest home improvement store. Then make a new top from grip tape for skateboards and that´s it!

      Here is, what mine looks like:

      https://www.dropbox.com/sh/16v54s8wurdmivd/AABg5kf0X3iPGMH2Y2Fyste-a?dl=0

      Have fun!

      Andreas

    • June 2, 2015 at 4:57 am #139267
      jesse.christenson
      Member

      Thanks Andreas! I actually have a Crybaby I don't use anymore and think this would be a lot of fun for me to try out! Thanks for sharing!

    • July 22, 2015 at 5:18 am #139859
      anibalresendez
      Participant

      Thanx for sharing

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.